Maple block heaters are designed for a wide range of uses in Chemical, Biochemical, Environmental, Clinical and other general lab applications including heating, digesting, incubating, concentrating, BOD, and other heating processes.
The Analogue controller uses a proportional ratio control system giving better uniformity across blocks and a good temperature control for a cost conscious laboratory.
There are 4 models to sit most laboratory needs:
BH 601A: a one block personal unit with a maximum temperature of 130°C
BH 602A: a two block unit with a maximum temperature of 130°C
BH602D: a two block unit with a maximum temperature of 200°C for higher temperature applications
BH 603A: a high capacity three block unit with a maximum temperature of 130°C
Various sized blocks can be chosen for different tubes and need to be ordered separately. The BH 601A needs one block insert; BH 602A and BH 602D, require two block inserts and BH 603A requires three block inserts.
Note : 96 x 0.2ml block can only be used in the BH603A .
All of the block heaters come with the block removal tool .
We provide 3-full years warranty supported from our UK service centre .
Room Temperature – 130˚C
|Max. Block Number||1||2||3|
|Temperature Maximum Variety between Identical Blocks @ 50 ˚C||±0.2˚C||±0.2˚C||±0.2˚C|
230V, 50 Hz or 110V, 60 Hz
|Dimension (mm)||140 x 270 x 110||220 x 270 x 110||275 x 270 x 110|
|Part Number||Product Description|
|BH-3-130-01||BH 603A Block Heater, Analog, Three insert blocks (various), room temp – 130 ˚C (require three insert blocks)||
|BH-2-130-01||BH 602A Block Heater, Analog, Two insert blocks (various), room temp – 130 ˚C (require two insert blocks)||
|BH-2-200-01||BH 602D Block Heater, Analog, Two insert blocks (various), room temp – 200 ˚C (require two insert blocks)||
|BH-1-130-01||BH 601A Block Heater, Analog, one insert blocks (various), room temp – 130 ˚C (require one insert blocks)||